Click the picture to understand the device works

 Test facility list

1、Direct-Reading Spectrometer(F20) Use:Test the chemical composition of material.

2、Tension Tester(WEW-600) Use:Test mechanical properties of material including: tensile strength, yield strength, elongation rate, shrinkage rate.

3、Impact Test Machine(JB-300) Use:Test the impact physical property of material.

4、Low temperature Chamber For Impact Specimen (CDW-60) Use:Used to low down the temperature of specimen for impact test.

5、Tensile sample scale distance instrument Use:Test the elongation rate of the material.

6、Hardness Test machine(HB-3000) Use:Test the Brinell hardness of material.

7、Portable Harder Tester Use:Test the Brinell hardness of material.

8、Metallographic Microscope(4XB，4XC) Use:Analyse Metallographic structure of material.

9、Polisher Use:Polish the surface of the metallographic testing samples.

10、Ultrasonic Testing Machine(PXUT-27) Use:Inspect the internal defects(shrinkage,porosity).

11、Portable Magnetic Particle Tester Use:Test the defects on surface & sub surface of metal products(like cracks)

12、Magnetic Particle Testing Machine(CJW-2000) Use:Test the defects on surface & sub surface of metal products(like cracks)

13、Intellectualized Temperature Gauge Use:Test the temperature of melted steel.

14、Non-contact infrared thermometer Use:Test the temperature of melted steel.

15、Surface Roughness Tester Use:Test the roughness of machined surface.

16、Coordinate Measuring Machine Use:Test the geometric dimension, shape and position of the object.

17、X-ray tester Use:Inspect the internal defects(shrinkage,porosity).

18、Meterage worktable

19、Physical Property & Non-Destructive Test Center（room A）